Closed Mold Processes Helps Control Fiber Volume
Closed mold processes have a variety of benefits both for the composites manufacturer and the consumer. In addition to creating materials that are light-weight with a high strength ratio, this process also allows manufacturers to control the volume of composite fibers in a given material batch.
Closed Mold Processes Works
Closed mold process combine composite fibers and resins in precisely calculated proportions. These materials are cured inside a two-sided mold or inside of a vacuum bag. The molds or bags are used to eliminate the possibility of the composite material coming into contact with air during the curing process. The process is capable of creating complex, smoothly finished shapes that are identical to one another.
Closed Mold Processes Allow for Control of the Composite Fiber Volume
One of the many benefits of closed mold process is that it is much easier to control the composite fiber volumes in the finished materials. Fiber volumes are important due to the fact that they can directly affect the properties of the finished composite material. Some of the properties that fiber volume effects include:
- Failure mode
- Matrix cracking stress
- Interfacial shear stress
In order to positively affect these composite material properties, fiber volumes in most high-performance composite laminates have a volume of between 55% and 62.5%, though volumes of up to 65% are technically possible with closed mold processes. These restrictions on fiber volume are imposed so that the composite fibers do not come into contact with one another or damage each other during the molding process, either of which could degrade the overall strength of the composite laminate.
Composites One Is Number One in the North American Composite Distribution Industry
When you’re searching for a great company to assist you with your composite supply needs, look no further than the customer-centered team at Composites One. With more than 40,000 products in stock from over 600 suppliers and more than 41 locations in the United States and Canada, our team can conveniently assist you with composite supplies, such as epoxy, polyester or vinyl ester resins, personal protective equipment and more. To find out more about how we can help supply your closed mold process manufacturing, contact the team at Composites One today.
- Composites One Presents Webinar | Make The Right Decision About Process Materials For Your Manufacturing Goals
- Composites One Presents Webinar | Efficiencies of Kitting and Plying for Processing Advanced Composite Materials
Have questions? Contact Us.